Message Board: WOODHAVEN Custom Calls
Home      Members   Calendar   Who's On
Welcome Guest ( Login | Register )
      


««12

Help! New Cherry Classic CrystalExpand / Collapse
Author
Message
Posted 5/18/2010 9:00:23 PM


Supreme Being

Supreme BeingSupreme BeingSupreme BeingSupreme BeingSupreme BeingSupreme BeingSupreme BeingSupreme Being

Group: Forum Members
Last Login: 5/14/2012 8:39:59 AM
Posts: 96, Visits: 153
You definitely didn't ruin your call.  YOu'll find there are usually multiple sweet spots on a high quality call such as the crystal.  As a basic rule, the outer portion of the pot is usually higher pitched and as you work toward the center, deeper pitched.  I like to make a half moon motion with the striker, with the arch being horizontal rather than vertical.
Post #6470
Posted 5/21/2010 9:55:08 PM
Junior Member

Junior MemberJunior MemberJunior MemberJunior MemberJunior MemberJunior MemberJunior MemberJunior Member

Group: Forum Members
Last Login: 6/4/2010 1:57:59 PM
Posts: 24, Visits: 38
R4Fan,

You didn't ruin your call. Just remember when you condition the call, always rub the screen on the crystal going with the grain of the wood in the pot (the way that the turkeys are lasered on the bottom of the call). You also always want to run your striker against the grain (against the way that you conditioned the surface). Never call in the middle of the call because that's the "dead" spot. In general, there are 2 sweet spots on the call, one above the logo and one below. Start near the edge and come down towards the center and the call will drop from high to low, as the last post suggests. Hope this helps; if not, just ask and I'll clarify if I can. Good luck with the call!

Jason

Post #6484
Posted 10/20/2010 11:58:57 PM
Forum Newbie

Forum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum Newbie

Group: Forum Members
Last Login: 10/20/2010 11:56:08 PM
Posts: 1, Visits: 1
ugg boots ugg


The calls you want to master are a basic yelp, cutting, purring, and clucking. As long as it sounds good, don't worry about the particular details. Now, for the many different preferences, I'd recommend going to youtube and searching terms like "running a friction call" or "yelping on a slate/crystal call". Good luck.






Post #6571
Posted 10/26/2010 7:41:22 PM


Supreme Being

Supreme BeingSupreme BeingSupreme BeingSupreme BeingSupreme BeingSupreme BeingSupreme BeingSupreme Being

Group: Forum Members
Last Login: 5/14/2012 8:39:59 AM
Posts: 96, Visits: 153
After you get the call conditioned and begin calling, make sure you experiement with different amounts of pressure on the striker.  Also, when working the striker, keep the top of the striker angled away from you, allowing most of the striker pressure to rest against your middle finger.  Keep practicing, it's an awesome call once you get the hang of it.
Post #6572
« Prev Topic | Next Topic »

««12

Reading This TopicExpand / Collapse
Active Users: 1 (1 guest, 0 members, 0 anonymous members)
No members currently viewing this topic.
Forum Moderators: Scott Ellis

PermissionsExpand / Collapse

All times are GMT -5:00, Time now is 12:00am

Powered By InstantForum.NET v4.1.3 © 2012
Execution: 0.313. 11 queries. Compression Enabled.
OUR
CATALOG